SilverFoxCPF
User
Expert Boarder
| Posts: 13 |  |
Karma: 0
|
Re:Battery testing questions... - 2007/09/17 05:45
Hello Guy,
The Sanyo Eneloop cells came out a little over a year and a half ago. I was able to get some and ran some tests on them.
If I can get the image function to work, I will post my test results.
Charging was done with the C-9000. The charge rate was set to 1000 mA, and the cell was allowed to go through the entire 2 hour top off charge. After charging, the cell was removed from the charger and left to sit on the table for about an hour. Discharge data was obtained from a CBA. Charging, resting, and discharging were all done at a room temperature of 68 F.
Here is the data...
As you can see, they are very good performers.
Tom
Post edited by: SilverFoxCPF, at: 2007/09/17 05:47
Post edited by: SilverFoxCPF, at: 2007/09/17 17:43
|
