Description
Fuel Cell cars are the cars of
the future. A lot of research has been done with electric cars, but
until the battery costs go down, the driving range goes up and the
weight of the batteries goes down, this will not be an option for the
general public, unlike the popular hybrid cars. A hybrid car has a gas
engine and an electric engine. The gas can continually recharge the
electric batteries.
In a fuel cell car, the fuel used is compressed or liquid hydrogen. A
fuel cell converts hydrogen and oxygen to water, and produces
electricity. Due to ongoing problems with storing liquid or compressed
hydrogen, currently, mostly buses are using fuel cell technology. They
can hold large tanks of compressed hydrogen on their roofs.
The type of hydrogen fuel cell currently used for buses and cars is the Proton Exchange Membrane Fuel Cell (PEMFC).
The fuel cell uses a catalyst, which is a platinum powder or compound,
to facilitate the reaction of hydrogen with oxygen. The catalyst is
spread as a thin coat on a large surface for maximum effect.
Why are there problems using hydrogen as a fuel? Except at high
compression, and/or low temperatures, hydrogen is a gas. It is the
lightest gas, and would tend to have high leakage through pipelines.
Due to its high energy content, it is also very explosive. There was
the explosion of the Hindenburg in 1937 in New Jersey. That was a
hydrogen lifted dirigible which went on fire. Due to the use of heavy
safety equipment to compress hydrogen, this is why fuel cell technology
is first being used in buses.
Another option being developed is to use hydrocarbons that are hydrogen
rich as the basis for hydrogen fuel cell technology. Hydrocarbons are
compounds of hydrogen and carbon. The leading candidates are CH4, which
is methane gas, a pure form of natural gas, and methanol, a liquid
alcohol compound, CH4OH. Both methanol and methane can be converted to
hydrogen gas using a chemical reformer. Reformers have a drawback in
that they lower fuel efficiency by as much as half. There is increased
miniaturization of chemical reformers for automobiles.
However, other compounds are being experimented with that are easier to
catalytically convert to hydrogen for a fuel cell and can be more
easily stored in a vehicle’s fuel tank. An example of the type of
system that could work is being experimented on at Daimler-Chrysler. It
involves simple borate, borax, a compound chemical that is produced and
used for soap. A running prototype minivan was displayed at the North
American Auto Show in 2002. The hydrogen fuel cell can run on hydrogen
that is liberated in a simple chemical reaction from sodium
borohydride. This chemical can be made in refineries from a combination
of borax soap and Hydrogen gas. The vehicle could run on sodium
borohydride, which would be processed in the car to yield hydrogen gas
for the fuel cell. The only exhaust product would be water (H20). The
other waste product would be borax (a form of soap), which would then
have to be reprocessed to sodium borohydride, to refuel the car again.
Infrastructure to produce hydrogen from methane or ammonia and then
produce sodium borohydride would be necessary at your local refueling
station.
By: Marius Ciobanu -
Sustainable Living Articles @ http://www.articlegarden.com
Saving the planet takes one small step. Subscribe to our Green Tip of the Day.
It's easy to make a difference!
